APPLICATIONS

The product is suitable for the majority of wall surfaces and is delivered cut to size. If different applications are desired, the sections can be cut to required dimensions without needing to be sealed.

PROPERTIES

– PVC self-adhesive decorative film

– Antibacterial

approximately 700gms/m2 when peeled off

– According to tests at +20 deg C

– after approximately 20-24 hours at the expected efficiency
– The film is resistant to all usual liquid chemicals within the pH- Range 4.0 to 9.0, all animal and plant oils and fats as well as numerous cleaning and disinfecting tools.
– Standard UPV-Cleaners or isopropanol should be used for cleaning.
UPV-Cleaners are used for usual cleaning: « Alcohol-based cleaning agents (max 70% voluntary preservatives),

isopropanol, cleaning benzines, etc .

In case of stubborn complaints or smearing e.g. methyl-ethyl-ketone, acetone, ethyl-acetate or chrome

standing ureas should be tested on a smaller area but not used over large surface it can damage the surface

Approximate Weight per Sqmt: 3.0 Kgs

Seamless Height: 1100mm

Approximate Minimum Seamless Length: 2m

Strong Directions:

Make sure the temperature is no

#include

using namespace std;

int main()
{
int num;
float avg, total;
cout << "Hello! We will calculate the average of 5 integers." << endl;
for(int i = 1; i <= 5; i++)
{
cout << "Enter integer #" << i <> num;
total += num;
}
avg = total/5;
cout << "The average of the 5 integers is: " << avg << endl;
return 0;
}

less than +16 deg C otherwise this will result in unsatisfactory results Ifc the film must be applied at lower temperatures A warm deflector is favorable

Make sure to clean the surface thoroughly before applying the film Remove any dust dirt or oils and dry the surface completely before application

Do not use any sharp or rough tools when applying the film this can cause damage and create air bubbles

Start by peeling off a small section of the film and apply it to the top of the desired surface Hold the remaining film taught and slowly peel off the backing while smoothing the film onto the surface

To remove any air bubbles use a squeegee or similar tool to smooth them out from the center of the section to the edges

strong Storage

Temperature ranges between +5 deg C to +30 deg C optimal room temperature is 20 deg C

No direct sunlight contact should be made with the film

strong More Installation Tips

Application temperature for the Strataflex decorative film should be a minimum of +16 deg C

If the film needs to be applied at a lower temperature a heat gun or warm deflector can help achieve an optimal application

Make sure that the surface is clean and dry before applying the film Any dust dirt or oils can prevent the film from adhering properly

Avoid using sharp or rough tools when applying the film as this can cause damage or air bubbles

To remove any air bubbles use a squeegee or similar tool to smooth them out from the center of the section to the edges

strong Cleaning and Maintenance

The Strataflex decorative film is resistant to most liquid chemicals within the pH range of 4.0 to 9.0 However standard UPV cleaners or isopropanol should be used for cleaning

It is important to avoid using harsh chemicals such as methyl-ethyl-ketone acetone ethyl-acetate or chrome cleaners as these can damage the film's surface

For best results it is recommended to clean the film with warm soapy water and a non-abrasive cloth

strong Storage

The Strataflex decorative film should be stored in a dry and cool environment with a temperature range of +5 deg C to +30 deg C It is important to avoid direct sunlight and humidity as this can damage the film

long Project Reference

Project Name:
Client:
Location:
Product Used:
Area:
Date of Installation:

Project Description:

The Strataflex decorative film was used to enhance the walls of the project It was chosen for its durable antimicrobial properties and its easy and seamless application process The project was completed within a week and the client was highly satisfied with the final result

strong Legal Disclaimer

The information in this document is for informational purposes only and is not intended to be used as a substitute for professional advice Muraspec makes no representations or warranties of any kind regarding the accuracy or completeness of this information and will not be liable for any damages arising from its use The user is responsible for determining