• Vertical Repeat: 1400mm
• Horizontal Repeat: 500mm
• Grain Pattern: Straight / Cross Grain

– All Strataflex products contain antimicrobial properties.

– As part of our commitment to environmentally friendly products, we do not use solvent inks in these products.

– This product is a Self-Adhesive Decorative Film.

– To view our IMO Certificate, please contact marine@muraspec.com translate it into french language. You can find IMO certificates in the download section of our website: https://www.muraspec.com/upholstery/

De Josselin: Les strataflex doit être utilisé conjointement avec la colle de contact et le topcoat Muraspec que nous recommandons.

(Josselin – PVC-Auflage: Bei diesen Produkten ist es wichtig, dass der Klebstoff “MURABOND” sowie das “TOP COAT” des gleichen Hauses aufgetragen werden – MURASPEC.)

• We recommend using our ‘MURABOND SB-100’ spray contact adhesive for all wall applications and Handrail applications on Smooth and Flat Surfaces which is available from JET PRESS LIMITED stock.
• Our ‘SB-100’ Spray Contact Adhesive is a High Quality fast drying adhesive. After it is properly applied – it develops a high bond strength that sets quickly.
• Our ‘MURABOND SB-100’ is a High Quality fast drying adhesive. After a smooth even coat has been applied – allow 10 minutes drying time then bring sections together rubbing all sections thoroughly to get an even suction.
• For Bedding surfaces allow up to 20 minutes time for adhesive to become touch dry before fixing panels into adhesive.
• Vertical Repeat: 500mm
• Horizontal Repeat: 1240mm
• Grain Pattern: Cross Grain

– All Strataflex products contain antimicrobial properties.

– This product is a Self-Adhesive Decorative Film.

– Self-adhesive products have a limited shelf life and should be used within 3 months of purchase- when stored a in dry location and at ambient temperature between +10°C to +20°C.

– Exposed Surfaces: Always remove all dust and dirt particles. In cases where surfaces are not completely sound, always apply a tack coat of Murabond SB-100.

– Bis ZU 3 Monate ab Herstellung: Für eine einwandfreie Verarbeitung muss ein Kleberspray verwendet werden. Maximale OSB–PU Größe 2400 mm x 1220 mm bei einer Dicke von bis zu 18mm. Bei starken Untergründen, prüfen Sie die Haftfähigkeit an einem kleinen Muster. Wird eine größere Platte gebraucht, kann diese durch den